Dok’s Shop – Vengeance for Istvaan V

Hi everyone, we thought it was time to show off our latest joint project – loyalist daemons. Now we know this is a contraversial topic but stick with us, we think we have a pretty good justification…

Back in early February Tom and I attended part 3 of the Sundering of Fortis II event put on by our friends Curtis and Grant. This was a doubles event and each pair could bring a free centurion model worth up to 150pts. Tom and I spent a while thinking what consul we could bring as we wanted to do something that stood out. We eventually settled on one of the new centurion types from book 8: the Esoterist.

For those of you who aren’t familiar, the Esoterist is a psyker who specialises in demonology (both banishing and summoning daemons). They fit right in with the traitor legions but it’s a bit tricker for loyalists.

Having settled on an Esoterist we then needed to come up with fluff for him and how to justify loyalist daemons. During the Horus Heresy daemons were more creatures of raw emotion than the settled looks that we know from 40k. Really anything can be a daemon so long as it is on the right base size!

Our idea came partly from the scene in Master of Mankind where the ghosts of marines (and Ferrus Manus) come to the loyalists’ aid. We thought it would be cool to have our Esoterist as a Iron Hand faced with the betrayal and death at Istvaan V unleashed his suppressed psychic abilities and brought forth daemons. These daemons, taking cues from the strong emotions in the esoterist, appeared in the form of the dead of the loyalist legions seeking vengance for their betrayal.

IMG_20200208_200256

We wanted to convert lesser daemons, brutes and a greater daemon to cover the various powers in malefic daemonology. The lesser daemons and the brutes were really easy to convert; we just built marines normally and then applied lots of battle damage.

Bullet holes are super easy to do, all you need is a drill bit and a hobby knife. Simply drill a small hole and then use the knife to expand the hole and make it look less regular. You can do multiple bullet holes next to each other to look like the marine was hit by someone rapid firing.

The greater daemon was a harder choice, as we wanted the model to have enough height and bulk that it could realistically be a greater daemon. We also didn’t want it to just be a monster after all it was supposed to be loyalist! Tom then had the cool idea of having a bunch of models on the base, rather than just one big model. This could then represent the spirit of the Great Crusade; everyone working together and mankind victorious over the Xenos. We bought some Custodes and Sisters of Silence models cheaply and then added some militia and solar guys leftover from our other projects.

Painting wise it was super quick. The models were sprayed with Grey Seer and then washed with Hexwraith Flame and Nighthaunt Gloom, allowing them to mix randomly across the models. This gave them an etherial look rather than being solid creatures.

When it came to basing we thought it would be cool to have half of the base blackened and cracked to represent the corrupting effect of the ghosts. They might be fighting for the loyalists but they are still daemons after all!

Overall the project was a fun one for us and we feel we managed to create a unique themed force. It can be used as an allied detachment in its own right, but most of the time will just be used for some fluffy summoning.

What do you all think? Did we pull off loyalist daemons?

Jamie and Tom

Muster the Militia!

So all three of us have signed up to a horus heresy militia event later this year. There’s only one slight problem with this plan…. I don’t currently have a single militia model! But now marks the start of a new project!

This section of the blog will chart my progress from never playing a single game with militia to playing a fully painted 1500 point list at a heresy event! I’ve played plenty heresy against solar and militia lists, just not with my own militia force.

My main challenge for this is the fact I’m quite a slow painter, I’ve received a lot of abuse from the other MSE boys for how long its taken to paint up all my salamanders! But I’m feeling super motivated for this project. Plus the event is a hard deadline that I can’t miss!

So let’s get stuck in….

My inspiration for this list is the new enforcer models. I love the look of them and wanted to experiment with making a whole army of them. My plan is to run an elite list of mechanised infantry and that way I have a cool themed list but also a realistic number of models to paint in the short time frame!

Please join me on this journey! Your advice and feedback will be much appreciated.

Stu

MSE blog photo
The first purchases to get this army started!

 

Dok’s Shop – Militia Land Speeders

Developed by Arkan Land primarily for the Legiones Astartes, land speeders were also used by the fledgling Imperial Army.

Expensive and difficult to maintain, they were reserved for the more prestigious outfits who had the contacts to field them in large numbers. One such force was the Byzant Janizars.

IMG_20191119_224633

When the Byzant Dominate was absorbed into the Imperium after the Siege of Byzant Alpha, they gained the support of the Mechanicum and their supply chain. The Emperor gifted several companies of land speeders to the Janizars, thinking they might suit the Janizar’s method of warfare.

He was right.

IMG_20191208_145317

The Byzant Janizars adopted these skimmers wholeheartedly, using them as mobile gun platforms to support the infantry’s advance and to help in patrolling the vast expanse of the Mediterranean Dust Bowl. They were equipped with a variety of weapons to suit any opponent, though their preferred load out was plasma weaponry. Although volatile and prone to accidents, the risks were worth it in the mega conflicts of the Horus Heresy. Their goal was to inflict as much damage as possible before the inevitable return of fire. 

The Byzant Janizars were extremely gifted and known for their ability to weave through all but the heaviest incoming fire. It was even rumoured that Janizar pilots were amongst those settled on the newly compliant world of Glavia.

IMG_20191117_172654

I was originally planning on running land speeders as ‘count as’ sentinels in my army to fit the theme of only having skimming vehicles. The only problem was it didn’t quite feel right so I put off making any. When I saw the Mournival Events additional units had militia land speeders I immediately went ahead and built the unit up.

IMG_20191117_172726

They currently are equipped with plasma guns and cannons but I’m planning on magnetising the weapons so I can equip them a variety of ways. I feel the militia list lacks mobile AP2 options, so these guys are going to be my terminator hunters. They pack a serious punch when they shoot but with only 2 hull points each and Gets Hot they’re prone to blowing themselves up as much as the enemy!

IMG_20191117_172719

The conversions themselves weren’t too tricky, its mainly a mix of the land speeder and sentinel kits. The hardest part was cutting away the space marine legs that are attached to the seats on the land speeder and replacing them with the sentinel pilots. The sentinel kit comes with plenty of weapon options and I had some plasma guns left over from the plastic heresy marines. I used the hooded heads from the Wildwood rangers rather than my normal converted Byzant Janizar helmets. In my fluff, they’re wearing some sort of sand scarf to protect them whilst patrolling through the Mediterranean Dust Bowl. Plus I thought their usual high helmets would be a bit impractical on the speeders!

IMG_20191117_172710

Overall I’m happy with how they look; they’re a fun fluffy unit that feels right at home amongst the Byzant Janizars.

Jamie

Dok’s Shop – Jetbike Praetor

Just a quick post to show my current project, a Praetor on jetbike to lead my Sky Hunter Phalanx list. I was struggling for a while to think of a suitable model when the new Red Scorpions characters were suggested to me. So with my trusted hobby tools I set about sawing Casan Sabius’ legs off and sanding down any scorpion insignia, which there actually was not a lot of. I then built a Custodes jetbike, sanding down some of the insignia and attaching an underslung heavy bolter. Jetbikes are armed with a heavy bolter rather than 6 bolters. I still need to work out what to do with the bit where the bolters are, and blend Casan’s body to the Custodes legs using some greenstuff but I’m really happy with how he looks. I think he’s a pretty unique character.

IMG_9403

IMG_9402

IMG_9404

And he is a sneak peak of the full command squad, with whom he rides. There’s also a Chaplain and a Primus Medicae in there. Its a pricey squad points wise, but will (hopefully) look the part on the battlefield. And looking good is all Emperor’s Children care about after all!

IMG_9410

J

Dok’s Shop – Isstvan Terrain

Isstvaan III was reborn in plague and fire, and its surface became a scarred and ruined graveyard of civilisation. The life-eater virus unleashed at Horus’ command reduced all organic matter to sludge then orbital bombardment ignited the gases released by the actions of the virus. Firestorms thousands of kilometres wide swept the surface of Isstvan III and after the fires died out, they left a realm of ash and smoke scattered with the twisted carcasses of burned-out hives and dead cities.

This description in Book I caught our attention and, as we are in the process of updating and painting all our scenery, we thought it would be awesome to convert up some terrain to represent the remains of Isstvan III. Our ruined buildings and pipes would work well enough, but we wanted to go further and create some of the terrain mentioned in Book I. It would also give some fun additional rules for playing games with these terrain pieces.

It provides rules for mysterious forests and rivers, mysterious structures as well as a host of other scatter terrain. We decided not to make any forest and the sculpted skull pools on the GW Realm of Battle Boards look perfect as ‘grave slime’ with some green tinted water effects paint on top. It was on the battlefield debris that we devoted most of our efforts.

To build the scenery we used the following tools (not show is the base material we used for the models. We used a canvas board material, but we’d recommend using plasticard as it is as strong and easier to cut!):

IMG_9052

(also learn from our mistakes and wear gloves when using expanding foam; it is a real pain to get off as water makes it stickier!)

Wrecked vehicles

The wrecks of Legion tanks, land crawlers and other civilian vehicles are everywhere on Isstvan III, their crews turned to sludge and hulls scorched by fire. The weapons on many of these wrecks may still function if an operator is willing to pull the dead from their seats and trust to fortune

This is the easiest way to show signs of a recent massive conflict and luckily we had a couple of spare vehicles lying about to turn into wrecks. First we built the rhino normally, leaving doors unglued so we could position them on the base. We then went to town cutting up the vehicle and using drills to simulate weapon fire, and we thought the dead gunner was a nice opportunity to show a last stand of a nameless marine. IMG_9023

Next thing we did was spray a load of expanding foam onto the base then pressed the rhino down onto it so it interacted more naturally with the base; it looks like it was in the thick of it before it got hit/wrecked. To blend the expanding foam into the base we used polyfilla and stuck the sand mix to it using pva glue. The end result looks like this:

We also knocked up a wrecked land speeder. It is meant to look like it got hit whilst skimming and then crashed into the ground, throwing dirt up in the process. We used expanding foam to build up the dirt then used polyfilla and sand to blend it in, like with the rhino. There are a couple of details on the model, like the gunshot hole in the pilot’s helmet maybe suggesting why it crashed. It will have a multi-melta attached, as a deadly weapon you can try and fire in game. IMG_9040

Corpse Mound

The dead are everywhere on Isstvan III. The shattered remains of thousand of dead Legionaries lie heaped like flotsam on a seashore, leaking liquefied flesh from the split joints and broken eye pieces of their armour.

Such a cool idea, and very grimdark. The idea of piles of dead was too cool not to include on the board. We struggled for a while how to represent it on the table though. We had a box of old plastic zombies lying around and added what spare bits we had. Initially we just tried to build up bodies by themselves but it did not look like much of a mound. Instead we went back to the expanding foam and then placed the bodies/marine bits in the foam as it expanded. This looks like it actually offers a cover save and the foam can just be the liquefied remains of the population.

IMG_9043

Whilst biological matter was eaten by the life-eater virus so there technically should not be any human corpses, we figured it helped make the corpse mound look more corpse-y and remind that humans had fought on the planet too.

Drop Pod Carcass

Hundreds of drop pods remain from when the loyalists deployed to bring Isstvan III back into compliance. Now many remain strewn across the grey sea of wreckage and ruin.

Again another image too cool not to do, we managed to get some drop pods really cheap on ebay and set to work making them look like terrain rather than models. We decided to have them on built up bases to represent the damage caused by their impact. Having cut out a suitable sized base we then added expanding foam before pressing the drop pods down in it. We think this makes the landing look realistic, what do you think?

IMG_9022

We then added polyfilla and sand to the based so it would match the boards. We pressed them in at a slight angle as well just to give a bit more interest to them. These drop pods were heavily inspired by the board that was at Warhammer World for a while with all the drop pods lying about. There’s still one more drop pod to build and we think they’ll look pretty great all together. IMG_9039

The centrepiece of our Isstvan board will be the crashed thunderhawk tile from ForgeWorld. We’ve started working on it already and decided to paint it in Emperor’s Children colours so it would stand out from the board. In addition it presented some fun themed battle opportunities around Saul Tarvitz and his actions on Isstvan III.

IMG_9044

That’s all we’ve done so far. The debris is currently sitting outside having been sprayed so there should be updates on them shortly! Let us know what you think of the terrain.

J

463rd Orta, Byzant Janizars – Part 1

‘The Byzant Dominate was a small empire in pre-unification Terra situated next to the Achaemenid Empire, on the eastern edge of the Mediterranean Dust Bowl. Despite being a small empire, it had a formidable army, and waged several successful wars throughout its long existence. These wars won the Byzant Dominate prisoners, young children offered to the empire by defeated monarchs and tyrants as terms for peace. These children were raised by the Byzanters, indoctrinated into their cult and eventually joined the ranks of the emperor’s bodyguard: the Byzant Janizars.

Given the best equipment and training the Dominate could muster, these corps, or Orta, occupied a privileged position in Byzant culture and politics. Over time they had gained a reputation as king makers, famed for naming a new emperor and demanding vast sums from them; if they did not pay then the emperor was killed and a new ‘volunteer’ rose to the purple.

The Byzant Dominate, like the Achaemenid Empire, was incorporated by the Emperor in the early days of Unification. The Byzant emperor, Sul-Tac, was determined to resist the Emperor’s diplomatic envoys, believing him to be safe in his capital fortress, Byzant-Alpha. When the massed ranks of raging Thunder Warriors arrived at the fortress gates, the general of the Byzant Janizars, Madhvian, saw an opportunity for political advancement. He feared the enhanced warriors, whose reputation for the brutal massacre of any opposition preceded them. With the Janizars, Madhvian stormed Sul-Tac’s chambers and killed him along with his family. He then opened the gates of Byzant-Alpha, presented the head of Sul-Tac as a gift, and named the Emperor as the new Byzant emperor.

Upon hearing this, the Emperor accepted their declaration, becoming the ruler of Byzant and thus acquiring the empire without bloodshed. For their treachery against their former ruler though, the Emperor had the Ortas swear an oath of loyalty, that the Emperor was the last and only ruler they would ever follow and fight for. In order to seal this oath, whilst punishing them, the Emperor ordered the Janizars decimated. He also obliterated Madhvian with his psychic might.

The Janizars took their oath to heart, and fought in some of the bloodiest campaigns during Unification. The Janizars were allowed to take the noble children of defeated empires (often those preliminarily rejected from the Astartes project) and raise them in their tradition. With the influx of recruits the Byzant Janizars more than tripled in size, and several new Orta were raised, sent to fight alongside the legions in the great crusade. Thanks to their noble birth and early loyalty, they were attached to some of the more noble expedition fleets, most notably a large contingent fighting with Horus under Lord Commander Varvarus.’

This is the fluff I wrote to give a bit of a back story to the Byzant Janizars. I always liked the idea of the Byzant Janizars after reading a fan-made campaign pack about the Macharian Crusade. In it they were described as one of the Emperor’s household, so I reasoned they were likely to have been in the Great Crusade. Even though some sided with Horus in the books, surely there were some loyalist units as well? In the supplement it said how the Byzant Janizars were one of the few regiments to use a-grav vehicles so I was planning on continuing that theme, with land speeders as sentinels and eventually converting up some skimmer leman russes (note I won’t actually count them as skimmers, I just think it’ll look cool!!!)

Anyway, I eventually worked out the bits I wanted after struggling for a while, especially with regards to the distinctive Janissary hat. I settled on the mix of kits you see below, and am pretty happy with the result. Here is the first test model I made:

Their hats are greenstuffed on and I eventually shaved off the gems on their head and replaced them with aquillas to make them look more futuristic.

I was really happy with how he looked so started converting up the rest of the squad. This is the first militia squad, and needs to be bumped up to 20 men strong. I think the squad as a whole looks quite impressive!

IMG_0222

I also wanted to take advantage of being able to choose your warlord trait in the cults & militia list and being able to increase the AP of a weapon in your army. AP2 rocket launchers should be pretty handy at being able to destroy enemy vehicles. I still need to paint up one more rocket launcher to make the squad legal size.

IMG_0230

Finally I quickly painted up a force commander to use in smaller games so I could use the army as an allied detachment for my Emperor’s Children. He will eventually be the commander of the second militia squad but he works as my HQ for now. IMG_8903His pose is based of the Vostroyan command squad on the old Warhammer 40k Battle Missions book as I loved their static poses observing the battlefield rather than being stuck in the middle of the fighting.

IMG_8902

I have also finished the first of my land speeders which will be count as sentinels. The fluff reason behind this is that their empire was based on the edge of the Mediterranean Dust Bowl and so skimmer tech proved more useful at being able to patrol their territory than conventional walkers/vehicles. Its armed with an autocannon and I wanted it to look burdened with extra supplies and comms to show their use as logistics support for the infantry as well.

IMG_8898

I’m really happy with how they’re coming along and how they look as a whole. Next on the list is the force commander and finishing these squads off. Then I’m looking forward to playing some games with these guys as an allied detachment. If you guys have any comments or ideas let us know.

Thanks for reading.

J

The Expedition to Iydris Part 2

Whilst the other two have been busy with real life, I have been swept up in Heresy enthusiasm and have converted up some models for my planned mid-heresy army. With some reshuffling in the Raven Guard list, the destroyers got dropped as they tended to under perform and didn’t really fit with the theme of the army.

So with the destroyers as a base I set up converting up the squad of palatine blades including the characters mentioned in the last post. For this build I mainly used the Chaos Raptors, the Dark Eldar Hellions and bits from our extensive bits boxes. First up is Kalimos:

He has the power sword from the Raptor kit plus a head and whip from the Hellions. I shaved down the ears of the head to make them a little less alien, then green stuffed some ‘chains’ and hooks around the face to represent his mutilation. I’ll paint the skin on his face all red and cut up; hopefully it’ll look good!

This is my interpretation of Lonomia Ruen. One knife comes from the Hellion kit and the other is just a spare dagger/spike I had lying around that looked suitably wicked. I added a few spikes to his shoulder pads and I think it looks good without being too over the top.

Here is Bastarnae Abranxe. One sword is from Lucius the Eternal that I’ve had lying around for ages but not actually done anything with and the other is from the Mk 4 power weapon kit. The scar and tattoo on his face will be done with paint.

Here are Basileon and Andragoras. These made up guys are equipped with phoenix spears made from the blades in the Hellion kit. I figured they looked close enough to phoenix spears with an added evil look to them. Both of them have heads from the Hellion kit; the hair looks nice and psychedelic and they have masks that represent the surgical upgrades given them sonic shriekers. I was worried that the heads look a bit too small, but overall I’m fairly happy with these guys.

And the final two are Diodotus Sidon and Laenas Apameon. These guys are also armed with ‘phoenix spears’ (I realise that Laenas’ is quite bent, it has since been straightened out) and have heads from the Raptor kit. Several of the helmets have extended face plates that are perfect to represent sonic shriekers.

IMG_8397

And here is the whole squad. I’m really happy with how they look overall. Their armour is still clearly mk.4, but they also very much look like traitors. They’re also more in line with how they are represented in Angel Exterminatus. I’ll do another post once they are fully painted; I’m going with the same scheme as my other Emperor’s Children, just with extra flourishes on them.

As ever if you have any comments or criticisms of them please let me know!

J

Dok’s Shop – The Laer

Welcome to Dok’s Shop! In this feature we’ll go over how we went about creating one of our conversion projects.

At the Great Crusade event we attended last weekend, a lot of time and effort had been put into creating an awesome campaign pack with the rules for all sorts of Xenos factions encountered by the legions. When I saw the Laer had rules I knew I had to make some; the temptation to build the cause of the Emperor’s Children’s downfall was too much!

Having decided I was going to make some, I started gathering images and descriptions of the Laer. Fulgrim was the natural starting point which describes the main combat branch of the Laer in some detail, describing how they all have snake like bodies, two sets of arms and chitinous bug heads. Each was armed with two swords and the lower arms fired blasts of green energy.

IMG_8103

Armed with this info I started looking for suitable models and narrowed it down to the Tyranid Raveners or the Sslyth models. I eventually settled on the sslyth because they were already armoured and looked a bit more lithe. Their heads were too snakey though, and then someone recommended the T’au Vespids, so I acquired a squad of them (the bodies I’ve saved to turn into some Xenos mercenaries for Inq 28). The Vespid heads fit pretty well onto the Sslyth bodies, needing only a little bit of greenstuff to sit right.

Finally I needed weapons for them; in Fulgrim they are described as being armed with sabre like swords, so I rounded up as many charnabal sabres as I could beg, borrow and steal from people! With all my bits arranged I started converting.

IMG_8100

This is the final product after building. Even though I was using the same stock body, I wanted to try and convert them a little bit to make them seem different. I’m particularly happy with the Laer holding the marine helmet, this will be painted purple as a nod to the bloodthirsty campaign. The third one is made up as some sort of squad leader in case I ever decide to expand the unit.

IMG_8346[1]

In terms of painting, I was in a bit of a rush to get them finished for the campaign so they’re not my best work and I will probably go back and finish them off at some point in the future. Their armour is described as a bright silver, but there is nothing about what colour they were, so I stuck with a white/purple (its slaanesh’s favourite after all).

IMG_8314

They performed quite well on the table top, killing a few models here and there. There most useful rule was making those in base contact take blind checks; a surprising number of marines failed this meaning they were much easier to cut down!

IMG_8282

Overall they were a fun unit to convert up, and I’m sorely tempted to make more of them and re-enact Solomon’s bold charge up the centre into the massed Laer…